Matters needing attention in the processing of high-precision scaffolding stamping parts

Before starting production, on-site workers need to inspect and organize the production equipment and the work site. The inspection is mainly to check whether the inside of the mold of the scaffolding stamping parts is cleaned, and to check the fastening condition of the die and the fixing condition on the press. At the same time, check the material thickness and surface cleanliness of the scaffold stamping parts. Before completing the above operations, you also need to check the lubrication quality of the production equipment to ensure stable production. And prepare the waste box, and put the precision scaffold stamping parts and precision terminal blanks in the designated position for easy access. It should be noted that in the entire production process, safety regulations must be followed. For example, when stamping, the required safety systems must always be implemented. Before work, the staff of the dresser need to wear work clothes and work caps, and carefully operate the production equipment to ensure safe operation. Remember, you should operate strictly in accordance with the various content specified in the precision scaffolding stamping parts and precision terminal process regulations, and you should concentrate your thoughts when you work. The first part of the product must be inspected and can only be produced after being qualified. During the stamping process, self-inspection and special inspection should be carried out at any time. In addition, waste materials need to be cleaned up in time. If the machine is found to be abnormal, it should be shut down immediately and the production can only be started after the problem is solved. After finishing the work, first turn off the power switch. Clean the press and precision scaffolding stamping parts, precision terminal punching die, apply lubricating oil to the working part of the punching die, and sort out the parts, waste products and waste materials. The above is a few issues that need to be paid attention to in the production process of precision scaffolding stamping parts. I hope to help you. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections