Matters needing attention when using electric screwdriver

Although the electric hardware screwdriver is easy to use and easy to operate, if the operation is not appropriate, it will also cause the effect of the electric screwdriver, and even cause the electric screwdriver to be directly damaged. Therefore, we must pay attention to some corresponding matters when using electric screwdrivers, the main seven points.

1. Please read the screwdriver instruction manual carefully before use, and use it according to its specifications.

2. The normal motor setting lock frequency is 4s/1 screw, 900 screws per hour, 7500 screws per day. Swiss Motor sets the locking frequency to 2.5s/1 screw, 1440 screws per hour, 12,000 screws per day, so you must pay attention to the size of the electric screwdriver motor during use, and do not operate blindly , In case the electric screwdriver is damaged by exceeding the workload. (Guide: Remove rusty fasteners cleverly)

3. It is more appropriate to use the torque of this model in the range of 45-75, and can not overload the torque of 80? for long-term use.

4. Do not directly adjust from the lowest torque to the highest torque or from the highest torque to the lowest torque during use, which may cause the clutch and torque thimble to fall off.

5. Tighten the screwdriver's fixing ring or torque jacket before use. The two ends of the power cable should be symmetrical with the socket holes of the power supply and electric screwdriver, and the nut of the power cable should be tightened.

6. Keep the internal parts of the screwdriver away from grease or other turbid liquids.

7. For the effectiveness of maintenance, please protect the screwdriver's serial number and warranty card.

More related hardware stamping parts industry news: