Matters related to the use of precision stamping molds

The structure of the precision stamping parts mold is closely related to the precision and quality of the precision stamping parts produced. However, in the process of processing, you must not only ensure the precision and quality of the stamping parts, but also pay attention to the design of the stamping die, which is also ours. Problems that must be considered when designing stamping molds. Below is a summary of some issues that should be paid attention to when using stamping dies for everyone. 1) Mold design should ensure the convenience of feeding, ordering, discharging and disposing of waste as much as possible. 2) For the production and processing of large and medium-sized precision stamping parts, if the operator must manually enter the mold to work, try to reduce the scope of the mold, minimize the time that a certain part of the body stays in the structure, and establish the mold danger zone Scope, configure the necessary protective measures and equipment. 3) For the production and processing of small and medium-sized precision stamping parts, the operator’s fingers, wrists or other parts of the body should be prohibited from reaching into the mold area to work; 4) Wastes or products are not allowed in the entire process of producing and processing precision stamping parts The condition of the workpiece missile endangers the operator's concentration, and in severe cases, it will hurt the operator. 5) The mold design plan should indicate the net weight of the mold on the general drawing for easy installation. 6) When assembling and disassembling mold parts, it should be convenient to prevent the possibility of pinching or cutting hands; the mold should be easy to collapse and store. 7) Obvious noise and vibration should be minimized when stamping parts are processed. 8) To prevent the burrs of precision stamping parts from scratching the operator. Operators are not allowed to experience great postural force during the actual operation of the stamping die to prevent the body from losing a stable posture; [Related recommendation] Learn more: What are the methods for polishing the surface of stainless steel? Learn more: Manufacturing characteristics of automobile stamping parts molds Learn more: Points to note in the design of continuous stamping dies (2)