Measures to prevent overturning and distortion of scaffold stamping parts

In the process of actual processing and production of scaffolding stampings, due to many uncertain factors, it is necessary to take some targeted measures in advance to deal with it to ensure that the quality meets the standard requirements. In the process of processing scaffold stamping parts, one of the more common problems is turning over and twisting, so what preventive measures should be taken? First, comprehensive consideration should be given when designing the mold. Everyone should know that in the production process, the mold used will directly affect the forming accuracy of the scaffold stamping parts. Especially for some relatively small parts, when blanking, usually arrange a larger area of u200bu200bpunching and blanking first, and then arrange a smaller area of u200bu200bpunching and blanking, which can reduce the impact of blanking force. Second, in the processing process, the shearing machine should ensure that the material is pressed tightly. In other words, when the mold is closed, the material can still be compressed. Especially for the key forming parts of scaffolding stamping parts, the discharge plate must be made into a block-type structure, which can effectively alleviate the wear problem caused by long-term stamping, thereby ensuring material compression. The third point is to add a strong pressure setting, that is, to thicken the size of the press part of the discharge insert. This is mainly to increase the pressure on the material on the side of the die, so as to prevent the scaffold stamping parts from turning over and twisting during punching. In addition, the end of the punch edge can be trimmed into a bevel or arc. This is also an effective way to reduce cushioning power. Not only that, during daily work, the staff also need to strengthen the maintenance of the mold to ensure the sharpness of the punching convex and concave die cutting edges. In addition, it is necessary to adjust the blanking gap reasonably, otherwise it may also cause the scaffolding stamping parts to turn over and distort. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections