Medical wire terminal die design safety

Medical wire terminal adopts the stamping mould processing and become, including stamping die is the main process equipment, stamping processing wire terminals is depends on the relative motion of upper and lower die to complete. Process due to the constant between upper and lower mould, if the operator's fingers to enter or stay in the mold closed area constantly, it can bring about serious threat to their personal safety. Medical wire terminal die design in structure should keep feeding, materials, parts, easy to clean up the waste. For small parts processing to prohibit the operator's fingers, wrist, or other parts of the body into the area of mold; For large parts of processing, if the operator must hand into the mold, as far as possible reduce the range into the mold, shorten a portion of the form as much as possible in the time duration of the mould, and shall specify the mould of danger area, equipped with the necessary protective measures and devices. The various parts of the mould should have sufficient strength and stiffness, prevent damage and deformation in the course of using, fastening parts must have the loose prevention measures, avoid accident harm to the operator. Not to be allowed to happen in the process of processing waste or workpiece missile phenomenon, affect the operator's attention, even by the operator. In addition to avoid burr blanking pieces cut staff. Do not allow the operator to stamping operations there is too much movement range, avoid lose body stable posture; Don't allow there is too much and too difficult movements in my homework. Avoid stamping processing has strong noise and vibration. Mold design should be in mould weight shown on the general layout, ease of installation, ensure safety. More than 20 kg parts processing should be lifting handling measures, reduce labor intensity. Parts of die installation convenient and safe, to avoid a possible clip, cut hand; Mold storage to facilitate disassembly. In short, even a minor problem in mould will affect the safety, only to analyze the specific problems of each homework, can put forward security considerations in the mould. Dongguan precision electronics co. , LTD has decades of experience of design and production of automobile fisheye terminals, and received high praise of domestic and foreign manufacturers. Welcome to negotiate. In this paper, starting from the original, if reprint please indicate the source and the author