Metal flat washer manufacturer, regarding the difference between gasket and washer + stamping accuracy can reach 0.01mm

Metal flat gasket manufacturers, regarding the difference between gaskets and gaskets, the following Xiaoshuo will take you to understand the difference between the two cognitions: Gasket is a mechanical seal between two objects, usually used In order to prevent the pressure between the two objects, corrosion, and the natural expansion and contraction of the pipeline and leakage. Since the machined surface cannot be perfect, the irregularities can be filled with gaskets. Gaskets are usually made of sheet materials, such as paper backing, rubber, silicone rubber, metal, cork, felt, neoprene, nitrile rubber, glass fiber or plastic polymers (such as polytetrafluoroethylene). Gaskets for certain applications may contain asbestos. A washer is a thin plate (usually round) with a hole (usually in the middle) and is usually used to distribute load thread fasteners. Other uses are as spacers, springs (Belleville gaskets, wave gaskets), wear pads, pre-display devices, lock devices. Rubber gaskets are also used in faucets (valves) to cut off the flow of liquid or gas. Rubber or silicon gaskets can also be used to reduce fan vibration. Usually the outer diameter of the gasket is about twice the inner diameter. Hardware, 15 years of focus on metal flat washer manufacturer, 5,000 square meters production workshop, hundreds of precision processing production equipment, 20,000+ sets of precision stamping die custom production experience, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, 16 passes The quality inspection is strictly controlled at all levels. It can quickly solve the urgent problem of flat washer time, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose to rest assured!