Metal flat washers, do you know the characteristics and knowledge of the use?

Metal flat washers should enter our lives and work more frequently. When choosing a metal flat washer, have you learned about its structure, characteristics and performance? Xiaoshuo shares with you: Flat washers are mainly used to reduce the pressure. When some parts are tightened with a large axial force, it is easy to make the washers be pressed into a dish shape. At this time, you can use materials and increase the hardness to solve the problem. . The locking effect of spring washers is relatively general, and important parts are used as little or not as possible. The self-locking structure is used for spring washers used for high-speed tightening. Generally, washers with surface phosphate treatment are used to improve their wear reduction performance, otherwise they will be more likely to rub. Heat and burn parts or cause parts to open, or even damage the surface of the connected parts. The spring washer structure should not be used for the thin plate connection. For this reason, spring washers are used less and less on cars. On the contrary, the connecting tooth profile in the tooth-shaped elastic washer is widely used in the automotive industry because of the large and uniform locking force, while the spacing tooth profile is less. For spring washers and elastic washers, the 60, 70 and 65mn steels in GB699-1999 'High Quality Carbon Structural Steel' can generally be selected according to the national standard. Hardware, 15 years of ingenuity and focus on metal flat washers, 20,000+ sets of custom production experience in molds, monthly processing of 100+ sets of molds, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, and 16 quality inspections. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!