Metal gasket factory, some operational problems should be paid attention to in the stamping process

Metal gasket factory, time is life, efficiency is wealth. While ensuring that qualified products are provided to customers, some operating methods should also be paid attention to. Xiaoshuo shares with you: 1. When the technician is on the mold and adjust the machine, only one person can debug, not two people. 2. Be sure to tighten the screws when setting up the mold, and stop the machine for 4 hours to check if the screws are loose. 3. When there is a problem in the production process of the mold, there is no need to remove the mold, and when it is directly repaired on the machine tool, the power supply of the punch must be turned off and the repairing sign can be hung on the power box before the mold repair can be implemented. 4. When installing the mold on the punching machine, first loosen the locking device of the guide rail, install the upper and lower molds, and then adjust the guide rail stroke until it meets the requirements and lock the fastening device. In addition, when the high punch is placed on the mold, the single punch must be hit Stroke, after the upper mold is locked, the lower mold is locked after hydraulic clamping, and another check before production. · Hardware, 15 years of ingenuity and focus on metal gasket factory, 20,000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, 16 quality inspection layers are strictly controlled . It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!