Metal stamping, efficient processing method

Dongguan hardware stamping parts can be used to manufacture small precision parts in clocks and instruments, as well as large covering parts for automobiles and tractors. Stamping materials can use ferrous metals, non-ferrous metals and some non-metallic materials.  Stamping parts processing is mainly formed by pressing metal or non-metal sheet materials with the pressure of a press through a stamping die. It has the following characteristics: 　　 aMetal stamping parts are stamped under the premise of low material consumption. The manufactured parts have light weight and good rigidity, and after the sheet metal is plastically deformed, the internal structure of the metal is improved, so that the strength of the stamping parts is increased. b During the stamping process, the surface of the material is not damaged, so it has a good surface quality and a smooth and beautiful appearance. This provides convenient conditions for surface painting, electroplating, phosphating and other surface treatments. c The stamping parts have high dimensional accuracy, the same size as the mold parts, and good interchangeability. No further machining is required to meet general assembly and use requirements. Stamping production relies on molds and presses to complete the processing process. Compared with other processing methods, it has the following characteristics in terms of technology and economy: a. Due to the use of mold processing, it can obtain the thin wall and weight that other processing methods cannot or are difficult to manufacture. Parts with light weight, good rigidity, high surface quality and complex shapes. b. The dimensional accuracy of the stamping parts is guaranteed by the mold and has exactly the same characteristics, so the quality is stable and the interchangeability is good. c. Hardware processing generally does not require heating of the blank, and it does not cut a large amount of metal like cutting, so it not only saves energy, but also saves metal. d Dongguan hardware stamping parts can produce dozens of pieces per minute for ordinary presses, while high-speed presses can produce hundreds or thousands of pieces per minute. So it is a highly efficient processing method.  Previous post: Examples of stamping parts