Metal stamping manufacturer, automotive facing stamping process [hardware]

Metal stamping manufacturers, over the years, have been shouldering the responsibility of improving precision stamping parts in the continuous development of automobiles, electronics and other products. Also in the stamping die, continuous growth and continuous progress. The middle protective surface bracket is the key load-bearing connection part of the integral instrument panel assembly of the automobile cab, and is an important part to ensure the stable and reliable use of various instruments of the automobile. In addition, if the part exceeds the allowable stress during forming, or the microcracks expand to a certain extent, causing tearing or skewing, this will not only waste material, but also put the mold in eccentric load operation and accelerate mold aging. The punching process of the middle protective surface bracket is: blanking and punching-punching incision-flanging forming-incision-flanging. There are various forms of tearing and skew during the forming process of the middle protective surface bracket. The tearing parts are mainly distributed at the hole pattern of the workpiece, the corner of the side wall and the junction of the R arc and the wall neck, etc., due to the forming of the stamping parts The production process conditions are different, and the proportion of each fractured part is different. The tear can be a one-time forming tear or a tear caused by the development of fatigue cracks, that is, invisible cracks. Hardware, 15 years of ingenuity focused on hardware stamping manufacturers, custom production of 20,000+ sets of molds, monthly processing capacity of 100+ sets of stamping dies, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, and 16 quality inspections. It can quickly solve time-critical problems, solve stamping accuracy problems, and solve quality problems for you. Choose, choose rest assured!