Metal stamping manufacturers share CNC computer gong processing operation specifications

CNC computer gong processing concept: CNC computer gong processing refers to processing with CNC machining tools. CNC index-controlled machine tools are programmed and controlled by CNC machining languages, usually G codes. The CNC machining G code language tells the Cartesian position coordinates of the machining tool of the CNC machine tool, and controls the feed speed and spindle speed of the tool, as well as the tool changer, coolant and other functions. Features: The most prominent aspect of CNC computer gong processing is artificial intelligence, which is not entirely manual or semi-manual as in the past. Because the production process is becoming more and more complicated, and the market demand for products is increasing, it is impossible to complete it by labor alone. The computer gong is intelligent, and it can be well controlled by the computer to complete complex processing. The production process of the computer gong is that the computer sends various commands to control the three-axis motors of the machine, so that it can walk according to the specified route, so as to produce various products with high processing accuracy and complex technology. Structure: The production process of the computer gong has such outstanding advantages and it depends on the composition of its body. The composition of the body is mainly castings. Castings are an important factor affecting the precision of computer gongs. The grade of computer gongs and whether they are stable in future use depend on the quality of the castings. A good casting is not deformed and has good rigidity. Only in this way can it be ensured that the computer gong can maintain good precision during the actual processing. CNC computer gong processing operation specifications: 1. Do not clean up the waste when the machining center is operating, and do not open the front door of the machine at will. 2. When changing the tool, be sure to check whether the props are installed firmly to avoid the tool falling during processing. 3. CNC computer gong processing must be operated by a dedicated operator, and non-operators are not allowed to operate at will. 4. When the machining center is in operation, the operator cannot leave the machine at will. It is necessary to ensure that the operator can press the emergency stop button at the first time in case of any emergency to ensure the safety of the equipment. 5. If the program needs to be modified, it should be operated by professional programmers. General operators are not allowed to modify the program without the permission of the programmer, or the program should be modified under the guidance of the programmer.