Metal stamping parts factory near Wuxi Meicun, drawing classification + hundreds of processing and production equipment

There are several classifications of the drawing processing of stamping parts. The technicians of the metal stamping parts factory near Wuxi Meicun have introduced them. Xiaoshuo has sorted out some knowledge for you, and I will share with you below: Drawing processing of stamping parts: using a platen device , Use the punching force of the punch to pull part or all of the flat material into the cavity of the concave mold to shape it into a container with a bottom. Reverse stamping drawing processing: reverse drawing the drawing workpiece in the previous process, the inner side of the workpiece becomes the outer side, and the outer diameter is reduced. Stretching processing of thinning stamping parts: Use a punch to squeeze the formed container into a concave mold cavity slightly smaller than the outer diameter of the container, so that the outer diameter of the bottomed container is reduced, and the wall thickness is thinned, which eliminates the deviation of the wall thickness , And make the surface of the container smooth. Dongguan Hardware Co., Ltd., 15 years of experience in stamping parts production, more than 20 mold Ru0026D and design engineers, 5000 square meters workshop, hundreds of precision processing production equipment, 3 million punching next-day production capacity, 20000+ sets of stamping die customized production experience, stamping The precision of machining parts can reach 0.01mm. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!