Metal stamping parts mold processing and customization, production measures + 20,000 sets of mold customization production experience

The technicians of metal stamping die processing and customization have said that when tens or hundreds of stamping parts are produced per minute, the processes of feeding, stamping, ejecting, and discharging waste are often completed in a short period of time. Equipment and quality accidents. Therefore, the production in stamping is a very important issue. There are several stamping measures, Xiaoshuo will take everyone to take a look: ①Realize mechanization and automatic feeding and discharging. ②Set up mechanical protection device to prevent hand injury. Use mold guards, automatic return devices and hand tools to feed in and out. ③Set up electrical protection and power-off devices. Set up photoelectric or air curtain protection switch, two-hand or multi-hand series start switch, anti-misoperation device, etc. ④Improve the clutch and brake structure. After the danger signal is issued, the crankshaft, connecting rod, and punch of the press can immediately stop in their original positions. Hardware, 15 years of ingenuity focused on metal stamping parts processing, 20000+ sets of stamping die custom production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and stamping accuracy up to 0.01mm , The raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!