Metal stamping parts processing, bend your wonderfulness in the bending process [Hardware]

For the processing of metal stamping parts, in stamping manufacturing, the bending process is a relatively common processing method, and the accuracy and curvature of the bending have an impact on the appearance and size of the stamping parts. Xiaoshuo shares with you how to make stamping parts more qualified and beautiful in bending? 1. The shape of the bending part should be as symmetric as possible, and the bending radius should not be smaller than the smaller bending radius allowed by the material. 2. The curved side is too short to be easily formed, so the straight part of the curved side should be made H>2δ. If H is required to be very short, you need to leave a proper margin to increase H, and then cut off the added metal after bending. 3. When bending parts with holes, in order to avoid hole deformation. Hardware, 15 years of craftsmanship focused on metal stamping parts processing, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punching times, stamping The accuracy can reach 0.01mm, and 16 strict quality inspection processes. It can quickly solve the urgent problem of stamping parts for you, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose worry-free, rest assured!