Metal stamping parts processing customization, what are the classifications of stamping dies + 20,000 sets of mold manufacturing experience

The technicians responsible for the processing and customization of metal stamping parts mentioned the classification of stamping dies. Generally, we can simply divide them into two types, namely engineering dies and continuous dies; engineering dies can be divided into composite dies, drawing dies, and riveting dies. Mold, etc., the following Xiaoshuo briefly introduces the structure and function of these molds: 　　Engineering mold: also called 'single process moldAfter the completion of this project, the product needs to be taken out of the mold manually or with a robot, and then placed in the mold at the next station to continue production. The entire product is not considered complete until one process of the mold is completed. This kind of mold is simple to repair, but it is time-consuming and labor-intensive to produce, requires more labor and time costs, and has a higher product scrap rate.　　Composite mold: Common composite mold structures include composite blanking, composite stretching, etc. This mold structure is slightly different from other engineering mold structures. The punch (also called male mold or punch) is designed in the lower mold, and the other templates are the lower splint (fixed punch punch), the lower stop baffle and the lower stripper (outer strip), and the upper mold in turn It is composed of a female mold (or knife edge), an inner stripping plate and an upper backing plate. The inner stripping is hung on the upper backing plate using a contour sleeve, and then pressed by a rod or spring. For example, for the composite mold used for blanking, the internal release is generally 0.50mm out of the master mold, and it should not be lower than the master mold, otherwise the knife edge of the master mold is easy to collapse or does not release. Continuous die: also known as 'progressive dieAbundant master fitters come to operate, but the production efficiency is very high. If the speed is fast, thousands of products can be produced in one hour, saving labor and time costs, and the product scrap rate is low. Hardware, 15 years of focus on hardware stamping parts processing customization, 20,000+ sets of stamping die customization production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, silk-like stamping accuracy 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!