Metal stamping parts processing operation specification (2)

When stamping parts are processed in stamping factories, operators need to always pay attention to ensure that no production accidents occur. Stamping processing plants also need to formulate strict operating specifications. Only when employees are fully able to work within the constraints of operating specifications, can employees be allowed to work. Precision today continues to introduce the operating specifications of metal stamping parts processing. 20. It is strictly forbidden for non-welder workers to connect to power supply and overhaul equipment. 21. It is strictly forbidden to blow the hot air gun at people, which can easily hurt the eyes. 22. Operators need to bring earplugs. 23. When an abnormality is found in the machinery and equipment, first turn off the switch power supply and then immediately find the on-duty technician to solve it. You cannot handle it by yourself. 24. When new employees enter the job, the team leader must interpret the operating specifications for them, and train the operating procedures once a day every week. 25. After adjusting the machine, be sure to adjust the machine and equipment to single-acting, and it is strictly forbidden to hit the unloading belt. 26. Do not store all flammable, flammable and explosive objects under the main gate. 27. Operators are strictly prohibited from chasing in the production workshop to prevent falling, knocking over the finished product or hurting themselves. 28. Carry out the inspection of machinery and equipment in accordance with the inspection content on the equipment check card. It is necessary to pay attention to the guidance of the high-speed punch and whether the brake system equipment is running normally, and the effects of single and continuous punches are clear. 29. Wear gloves during stamping operations, and be focused, otherwise your hands will be hurt. 30. At work, first check whether there is any abnormality in the operation of the equipment, such as unclear orders, continuous flushing, insensitive actual operation, or common failures of household appliances. Shut down immediately and find a technician on duty to solve it. 31. It is strictly forbidden to use button switches for high-speed presses, and all the machinery and equipment in the main room are removed. 32. When investigating and inspecting the equipment of metal stamping parts, be sure to disconnect the power supply and perform actual operations. [Related recommendation] Learn more: What are the methods for polishing the surface of stainless steel? Learn more: Manufacturing characteristics of automobile stamping parts molds Learn more: Points to note in the design of continuous stamping dies (2)