Metal stamping parts processing, the advantages of stamping processing + ISO system control manufacturer

The processing of metal stamping parts has some other advantages compared with other processes of metal processing. Xiaoshuo sorted out a few points, and let’s understand it with you: Metal stamping parts are mainly applied to plates, village materials, etc. through punches and dies, so that they are deformed and separated, so as to obtain the metal stamping parts we want, relative to castings and forgings. In terms of metal stamping parts, they have the advantages of thinness, uniformity, lightness and strength. Metal stamping parts can produce stamping parts with ribs, ribs, undulations or flanges that are difficult to manufacture by other methods to improve their strength and toughness. If precision molds are used, the precision of the workpiece can reach micron level, and the repeatability is high. Consistent, holes, bosses, etc. can be punched out. If a multi-station continuous die is used, hundreds of parts can be produced per minute, and the processes of feeding, stamping, discharging, and discharging waste can be completed in a short time. Metal stamping parts are generally no longer processed by cutting, or only a small amount of cutting is required Processing. Hardware, 15 years of ingenuity and focus on metal stamping parts processing, 20,000+ sets of stamping die customized production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, and 16 strict quality inspections. check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!