Metal stamping parts processing, using technology to provide customers with satisfactory results

In the processing of metal stamping parts, some common problems are often encountered in the production process. The stamping plant needs to continuously solve the problem points and provide customers with satisfactory results. 1. Burr: In the process of punching or cutting edges and corners, there is not completely leftover material, and burrs are generated under the section of the steel plate. When the burr height is 0.2mm or more based on the section of the steel plate, the iron powder generated will damage the mold and cause unevenness. . 2. Concave and convex: The surface of the material is abnormally convex or concave, which is caused by foreign matter (iron filings, dust) in the uncoiling line. 3. Deformation: mostly caused by mold problems. Check which part of the deformation is, and make changes to the corresponding mold. Hardware, 15 years of ingenuity focused on metal stamping parts processing, 5000 square meters factory area, 20000+ sets of stamping die custom processing and production experience, more than 20 Ru0026D and design engineers, stamping accuracy can reach 0.01mm, 16 quality inspection layers are strictly for quality check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve mass production quality problems.