Metal stamping parts-the application and characteristics of the spring sheet

The production of metal spring sheet is a special process in which materials (metal or non-metal) are processed into parts (or semi-finished products) through cold stamping of stamping dies. When designing hardware springs, in addition to making the designed springs meet the requirements of the product, the manufacturability of the parts should also be ensured. The so-called manufacturability of metal stamping parts refers to the adaptability of the parts to the stamping process, that is, whether the designed hardware parts can meet the process requirements of stamping parts processing plants in terms of structure, shape, dimensional accuracy, etc. Practice has proved that the processability of stamping parts is directly related to the difficulty of processing the parts, the quality of the products, and the level of labor efficiency and economic benefits. The battery spring sheet is a general electronic hardware accessory made by manual riveting of metal stamping parts and tower springs. The main function of the battery sheet is to firmly support the battery and conduct the current of the battery to each Among the electronic components, the main structure of the electronic products is energized: the base of the metal stamping parts and the pressure spring are combined. The method of riveting the battery spring sheet: 1. In the process of producing and processing the battery sheet, a hole is punched in the base of the stamping part, and the stamped part is placed on the manual stamping machine, and placed in the hole of the metal stamping part For a corn, the spring is placed in the corn, and the head of the corn is punched by a manual punch, so that the corn is firmly riveted with the spring. 2. When the base of the metal stamping parts is produced, the metal bottom seat is stamped into a protruding part, and the left and right parts are connected to the stamping part to form a small bridge. When the pressure spring is inserted, the metal spring is inserted through manual machinery. Beat or punch at the place, so that the protruding part is firmly stuck in the middle by punching. This is the more commonly used bridge cell, which has a better effect, and the spring riveting is firmer and will not loosen. Article Recommendation: Manufacturers must know some dangerous factors in stamping workshop Previous post: Manufacturers must know some dangerous factors in stamping workshop