Metal stamping parts, the details determine the customer's use results

For metal stamping parts, qualified products start from doing every detail well. To provide customers with qualified products, to provide caring services, and to complete customer needs is the result of people's work all the time. 1. When designing the structure and shape of the metal stamping parts, the surface and combination of simple and reasonable structure should be used, and the number of processed surfaces and the processing area should be as small as possible. 2. Choose a reasonable method of blank preparation in mechanical manufacturing, which can directly use profile, casting, forging, stamping and welding. The selection of the blank is related to the specific production technical conditions, and generally depends on the production batch, material properties and processing possibilities. 3. The requirements of the forming performance of metal stamping parts. In order to facilitate the improvement of stamping deformation and the quality of the parts, the material should have good plasticity, small yield ratio, large plate thickness directivity coefficient, small plate plane directivity coefficient, and material The ratio of yield strength to elastic modulus is small. The separation process does not require a material with good plasticity, but a material with a certain degree of plasticity. 4. Specify appropriate manufacturing accuracy and surface roughness. The cost of stamping parts will increase with the improvement of accuracy, especially in the case of high accuracy, this increase is extremely obvious. Therefore, high accuracy should not be pursued when there is no sufficient basis. Similarly, the surface roughness of metal stamping parts should also be appropriately specified according to the actual needs of the mating surface. , 15 years of ingenuity focusing on metal stamping parts, 20,000+ sets of mold customization and production experience, monthly processing capacity of 100+ sets of molds, production capacity of 3 million punches per day, stamping accuracy up to 0.01mm, 16 quality inspections strictly for quality control. It can quickly solve the time-critical problem for you, solve the problem of stamping accuracy for you, and solve the problem of mass production time for you.