Metal stamping terminal development experience exchange

The control hardware stamping terminal characteristics: 1. The reserved finishing material width of 0. 035mm( Is equal to the thickness of 0. 30 mm 11. 7%) 2. R Angle as R0. 50mm( Is equal to the thickness of 0. 30 mm 166. 7%) 3. Punch and blade unilateral clearance of 0. 005mm( Thickness of 1. 67%) 4. Punch the polishing processing ( Yu jun) 5. As raw material, and then make the finishing material, no other blanking work stop near the plate. TEST2( 0. 5PR/AFPC) Features: 1. The reserved finishing material width of 0. 06mm( Is equal to the thickness of 0. 30% of the 20 mm) 2. R Angle as R0. 050mm( Is equal to the thickness of 0. 25% of the 20 mm) 3. Punch and blade unilateral clearance of 0. 004mm( Thickness of 2. 0%) 4. Punch without polishing treatment 5. In as coarse and fine blanking, near the plate for the expected work station, plate stability is poorer. Special tip # : dongguan high-precision electronic technology co. , LTD. , for large and deep high tensile) with more than a decade of professional and technical level, can better for the new and old customers for bulk, better for the new and old customers for big, thick pieces of aggravation. Metal stamping, LED stent professional web site: