Method for quickly cleaning metal stamping parts

Cleaning is an indispensable process in the production of metal stamping parts. This article will briefly introduce two common methods for fast cleaning of metal parts. Of course, these knowledge points are well understood by metal stamping parts processing manufacturers, and they have to choose their own suitable methods. . There are two common cleaning methods for metal stamping parts: physical cleaning and chemical cleaning. One is through the principle of acousto-optic thermoelectricity, through external forces, such as ultrasonic, high and low pressure, friction, etc., of which ultrasonic cleaning is more widely used; the other is to use chemical reactions, which are generally various solvents, organic Or mineral acids, or oxidants, etc., among which mineral spirits are widely used. 1. Ultrasonic automatic cleaning. The use of large-scale ultrasonic cleaning machines is more common in metal stamping parts processing plants. It has higher production efficiency than traditional cleaning methods and meets a shorter lead time. It is a good choice to use sound waves to remove stains on the surface without causing any damage to the components. The cleaned parts can be cleaned and packaged after drying, which is convenient and fast. 2. Solvent oil cleaning. This chemical method is mainly aimed at the cleaning of organic matter such as oil stains. The principle is that the oil stains are easier to dissolve with this solvent, and will not adhere to the surface of the metal stamping parts. It has good volatility, but pay attention to the use of non-toxic and gas-free solvents. Oil, friendly and harmless to human body, suitable for hardware cleaning. [Related recommendation] Learn more: What are the methods for polishing the surface of stainless steel? Learn more: Manufacturing characteristics of automotive stamping parts molds Learn more: Points to note in the design of continuous stamping dies