Mobile phone battery shrapnel processing technology

Metal stamping parts are widely used in various fields of our lives, such as some electronic devices, mobile phone battery shrapnel, auto parts and so on. Metal stamping parts are very important in life. The processing technology of mobile phone battery shrapnel stamping parts should be based on the following points: 1. Under the condition of ensuring normal use, the dimensional accuracy level and surface roughness level are required to be as low as possible, which is beneficial The interchange of products reduces scrap. 2. It must be beneficial to improve the utilization rate of metal materials, reduce the variety and specifications of materials, and reduce the consumption of materials as much as possible. Use low-cost materials where permitted, and make the parts as waste-free and waste-less as possible. 3. The stamping parts must be simple in shape and reasonable in structure, which is conducive to simplifying the structure of the mold and simplifying the production and processing procedures, that is, the processing of the entire part is completed with the least and simplest procedures, and the operation is simple, easy to achieve mechanized and automated production, and is beneficial to improve productivity . 4. First of all, the basic performance of the product must be met, and the assembly and repair of the product need to be convenient, fast and labor-saving. 5. Stamping parts should be processed as far as possible using existing materials, equipment, process equipment, and process flow, and should help ensure the life of the die. Before processing the mobile phone battery shrapnel stamping material, hardness testing is required to determine whether the annealing degree of the metal sheet is suitable for the subsequent stamping processing. Different types of stamping processing technologies require plates with different hardness levels. After testing, they are processed and produced. The yield rate will be greatly increased.