Mobile phone micro motor stamping parts

Dongguan precision is a strong aptitude mobile phone micro motor stamping parts manufacturers, not only has a professional team, exquisite technology, perfect management system, and also actively participate in the customer's new case early development seminars, and obtained the customer high praise. So-called stampings is power by means of conventional or special stamping equipment, the deformation of sheet metal in the mould is directly force and deformation, thereby gaining a certain shape, size and performance of the production technology of product parts. Sheet metal, stamping mould and equipment is processing of the three elements. Cold stamping processing is a kind of metal deformation processing method. So, called cold stamping or sheet metal stamping, stamping for short. It is plastic metal processing ( Or pressure processing) One of the main methods, also belongs to the material molding engineering technology. Mobile phone micro motor stamping as one of the stamping parts, production matters which should pay attention to? 1, the material, waste and mold the need to wear gloves when using the homework, so as not to scratch the hand. 2, when there is oil must be clear in time, in order to avoid slippery wrestling. 3, pay attention to drag the mould to prevent falling on the ground ( To put the flat car in minimum to just die) 。 4, it is strictly prohibited to the electrician personnel and maintenance of electrical machines. 5, it is strictly prohibited to air pressure gun aimed at one blow, easy to hurt the eyes. 6, operators need to wear ear plugs. 7, found that when the machine abnormal switch off the power supply first, then call the technician on duty in time, cannot do STH without authorization. 8, new hires first day at work, the team leader must be good to his safety operation specification, the first week to learn every day a safety operation procedures. 9, the machine, be sure to dispatch the machine to the single action, it is forbidden to play moving strip. 10, under the switch can't store any flammable, explosive. 11, operators are strictly prohibited in the workshop in chase chase, lest wrestling, down products, or hurt yourself. 12, according to the equipment point check card equipment check check content, pay special attention to punch guidance and brake equipment operation is normal, single and even the impact and function. 13, in the small punch ( 10 t) When installed on the mould, loosen the first rail locking device, install the lower die, and then adjust the guide rail travel, until it meets the requirements and locked tightly solid device, the other in a high impact on die, must hit single stroke and lock on the mold, the mold after the hydraulic clamping lock, again for a check-up before production. 14, discharge, or hand took the embryo of a single to send, must use special tools ( Pliers, hook) With bare hands, it is strictly prohibited to send, take the embryo. Single switch to hand injury, to double the switch. The machine can't leak, otherwise you will fall down. The power supply not exposed, dangerous. Should wear gloves when 15, stamping iron, concentration, otherwise the injured hand. 16, in work, first check whether there is any abnormal on equipment operation, such as single, even not clear, the operation is ineffective or electrical failure, to immediately stop looking for technician on duty to deal with in a timely manner. 17, punch press foot switch is strictly prohibited, the machine comes with all down. 18, cleaning, inspection equipment, must cut off the power supply after the operation. 19, cut off power supply, cleaning, scrubbing and working mesa, remove the mold maintenance warehouse, regularly check the oil lubrication system and so on every Monday.