Mold machining accuracy is the prerequisite for the production of high-quality flat washers

We all know that high-quality flat washers are stamped by stamping dies, so a qualified flat washer is firstly made by the reasonable design, precise processing and strict process control of this set of molds. So how to provide customers with qualified products, the prerequisite is to work hard on the mold first. The mold designer must first consider the selected material before designing, and carry out a reasonable mold design according to the performance of the raw material. In the design, the designer needs to consider the flatness, size and accuracy requirements of the flat washer required by the customer, and also need to consider the problem of burrs. Then there is the processing method of the mold. The selection and processing method of the mold steel is an important part of the mold cost. The corresponding mold steel can be selected according to the material of the flat washer, and the parts with strict precision requirements can be processed with slow wire. Hardware, 15 years of craftsmanship focusing on high-quality flat washers, 20000+ sets of non-standard mold customization production experience, imported and national standard raw materials, monthly 100+ sets of mold processing, daily production capacity of 3 million strokes, flat washers accuracy can reach 0.01mm, 16 quality inspections are strictly controlled at every level. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!