Nanhai Jinsha hardware stamping processing, analysis of the composition of stamping dies + 20,000 sets of mold manufacturing experience

Nanhai Jinsha hardware stamping processing manufacturer said that although the structure and complexity of various stamping dies are different, and the parts that make up the mold are diverse, they are always divided into upper and lower dies. The upper die is generally fixed on the slider of the press by a die handle, and moves up and down along the rail of the press with the slider, and the lower die is fixed on the worktable of the press. The classification and functions of the components of the stamping die are as follows: 1. Working part It is a part that directly contacts the stamping material and applies pressure to it to complete the stamping process. The working parts of the die include a punch, a die, and a punch and a die, which are also called forming parts, which are the most important parts in the die. 2. Positioning parts It is to determine the correct position of the material or process parts in the die, so that the stamping parts can obtain qualified quality requirements. The positioning parts belonging to the feeding guide include guide pins, guide plates, side pressure plates, etc.; the positioning parts belonging to the feeding distance include starting stop pins, stop pins, guide pins, side edges, etc.; belong to block materials or The positioning parts of the process parts include positioning pins, positioning plates and so on. 3. Parts such as pressing and unloading parts play the role of pressing materials, and ensure that the waste or stamping parts stuck on the punch and the cavity L are unloaded or pushed (ejected) to ensure that the stamping work can continue get on. The function of the holding plate is to prevent the blank from moving and bouncing. The function of the unloading board is to facilitate the discharging and cleaning of waste materials. Usually, the unloading device refers to the removal of stamping parts or waste from the punch; the pusher and ejector device refers to the removal of the stamping or waste from the die. Generally, the one installed in the upper mold is called the pusher: the one installed in the lower mold is called the top. Keep improving is the constant pursuit of people. Hardware, 15 years of focus on Nanhai Jinsha hardware stamping processing, 20,000+ sets of customized stamping die production experience, monthly 100+ sets of die processing, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. Do every piece of metal stamping with your heart, is your great partner!