Nanjing metal stamping parts processing, the technological advantages of metal stamping + stamping accuracy can reach 0.01mm

The technician in charge of the hardware of the Nanjing metal stamping parts processing plant mentioned that the technological advantages of metal stamping include the following points. The following Xiaoshuo has collected relevant information and will take you to find out: 1. The metal stamping parts are in the information Under the premise of low cost, the parts produced by stamping have light weight and good rigidity, and after the sheet material is plastically deformed, the internal arrangement of the metal is improved, so that the strength of the stamping parts is increased. 2. The metal stamping parts have high dimensional accuracy, which is uniform and common with the mold parts, and has good interchangeability. No further machining is required to satisfy general device and application requirements. 3. In the stamping process, because the appearance of the material is not damaged, it has a good appearance quality and a lubricating and beautiful appearance, which provides convenient conditions for surface painting, electroplating, phosphating and other surface treatments. Hardware, 15 years of focus on the processing of metal stamping parts in Nanjing, hundreds of processing and production equipment, 20,000+ sets of customized production experience in stamping dies, monthly processing of 100+ sets of molds, daily production capacity of 3 million punching times, and a stamping accuracy of 0.01mm. 16 quality inspections are strictly controlled, focusing on quality and meticulous design. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!