Nanpi County metal stamping parts processing plant, die structure + hundreds of precision processing production equipment

Die structure. A die is a tool that separates or deforms the sheet material. A typical die structure consists of an upper die and a lower die. The technicians of Nanpi County Hardware Stamping Parts Processing Factory have introduced relevant knowledge, Xiaoshuo compiled some information, and I will share with you below: The die handle of the upper die is fixed on the slider of the punch, and moves up and down with the slider. The die is fixed on the worktable of the punch press. The punch and the die are the working parts of the die that deform or separate the blank, and are fixed on the upper and lower templates with a pressure plate. The upper and lower templates are respectively equipped with guide sleeves and guide posts to guide the alignment of the punch and the die. The guide plate and the positioning pin are respectively used to control the feeding direction and length of the blank. The function of the discharge plate is to release the workpiece or blank from the punch after punching. Hardware, 15 years of ingenuity and focus on metal stamping parts processing, 20000+ sets of stamping die customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, hundreds of precision processing production equipment , 16 quality inspections are strictly controlled at every level. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!