Ningjin metal stamping parts factory, what is the reason for the stamping deformation + 3 million punching next day production capacity

The technicians in charge of the Ningjin Hardware Stamping Parts Factory said that the surface quality of mold working parts has a very close relationship with the mold’s wear resistance, fracture resistance and adhesion resistance, which directly affects the service life of the mold, especially It is the surface roughness value that has a great influence on the life of the mold. If the surface roughness value is too large, stress concentration will occur during work, and cracks will easily occur between the peaks and valleys, which will affect the durability of the die, and the corrosion resistance of the workpiece surface, which directly affects the service life of the die For this reason, Xiaoshuo feels that the following matters should be paid attention to: (1) During the processing of mold working parts, it is necessary to prevent the surface of the parts from being damaged by grinding, and the grinding process conditions and process methods (such as grinding wheel hardness and particle size) should be strictly controlled. , Coolant, feed rate and other parameters); (2) During the machining process, it is necessary to prevent macro defects such as knife marks, interlayers, cracks, and impact scars on the surface of the mold working parts. The existence of these defects will cause stress concentration and become a fracture. The root cause of the mold is the early failure of the mold; (3) The use of fine processing and fine processing such as grinding, grinding and polishing can obtain a smaller surface roughness value and improve the service life of the mold. Hardware, 15 years of focusing on Ningjin Metal Stamping Parts Factory, 5000 square meters production workshop, hundreds of precision processing production equipment, more than 20 Ru0026D and design engineers, monthly mold processing capacity of 100+ sets and daily production capacity of 3 million punching times, stamping accuracy Up to 0.01mm, 16 quality inspection layers are strictly controlled. It can quickly solve the urgent problem of time when choosing hardware stamping processing, solve the problem of stamping accuracy, and solve the problem of production quality. For 15 years, I have been conscientious and dedicated to the results of your needs for the results of work!