Notebook computer precision stamping and drawing parts

A notebook computer company found hardware to supply precision stamping and drawing parts for notebook computers. The quality of the products and all packaging were extremely strict when stamping. Convex convex surface facing upwards. Wear anti-static gloves throughout the product process. It is forbidden to take it directly. The product must be taken vertically during production, and no contact surface or point with the mold or other objects is strictly forbidden. So as not to cause scratches when dragging the product or taking the product. 1. When starting up, employees must be trained by the team leader before they can start production. 2. Before starting the press, it is necessary to add lubricant to the mold, prepare the stamping coolant and stamping tools, and install the qualified product container. 3. Visual inspection: There is no obvious crushing, lack of material, burrs, imprinting and other defects in the appearance. The surface is bright and dust-free, and must meet the ROHS environmental protection requirements and be green. Operators are required to take 3-5 products for inspection every ten minutes. 4. Put the stamped products neatly and separate them with paper to avoid stacking. 5. After finishing stamping, clean up the waste and debris around the machine tool in time, and turn off the machine. 6. The produced products use hollow board turnover boxes, and each product is separated by pearl cotton. It must be ensured that there are no scratches, collisions and stacks during the turnover transportation. 7. Handle with care when packaging, and each small bag cannot be stacked to avoid product deformation.