Ordinary flat washer, 3 million punching next-day production capacity + flat washer use [hardware]

Ordinary flat washers are mainly used to reduce pressure. When some parts are tightened with a large axial force, the washers are easily pressed into a dish shape. At this time, the material can be changed and the hardness can be improved to solve the problem. Xiaoshuo will work with you to understand: The locking effect of spring washers is relatively general, and the important parts are used as little or not as possible. The self-locking structure is used for spring washers used for high-speed tightening, and the surface phosphated washers are selected to improve their performance. Anti-friction performance, otherwise it is more likely to cause friction and heat to burn parts or cause parts to open, or even damage the surface of the connected parts. The spring washer structure should not be used for the thin plate connection. For this reason, spring washers are used less and less on cars. On the contrary, the connecting tooth profile in the tooth-shaped elastic washer is widely used in the automotive industry because of the large and uniform locking force, while the spacing tooth profile is less. For spring washers and elastic washers, the 60, 70 and 65mn steels in GB699-1999 'High Quality Carbon Structural Steel' can generally be selected according to the national standard. Hardware, 15 years of craftsmanship focusing on ordinary flat washers, 20,000+ sets of customized production experience in stamping dies, monthly processing capacity of 100+ sets of molds, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, and 16 quality inspections. . It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!