Precautions for the production of precision metal stamping parts

Precision metal stamping parts are widely used in our production and life, bringing great changes and convenience to our lives. So what are the precautions for stamping parts processing factories when producing precision metal stamping parts? Next, the author will give you a brief introduction. 1. Regularly check the die installation base of the punch turntable and stamping parts to ensure the coaxial accuracy of the upper and lower turntables. 2. When installing the mold, the stamping personnel should use soft metal manufacturing operating tools to prevent damage to the metal stamping parts when knocking and crushing during the installation process. 3. The precision metal stamping parts should be strictly inspected before installation and use, the dirt should be cleaned off, and the guide sleeve and die of the drawing stamping parts should be carefully checked for good lubrication. 4. In order to ensure the service life of metal stamping parts, the spring of the mold should be replaced regularly to prevent the fatigue damage of the spring from affecting the use of stretch stamping parts. 5. When the punch and die cutting edges of stamping parts are worn, they should be stopped in time and sharpened in time, otherwise it will rapidly expand the wear of the die cutting edge, accelerate the wear of the die, and reduce the quality and life of the die. [Related recommendation] Learn more: What are the methods for polishing the surface of stainless steel? Learn more: Manufacturing characteristics of automobile stamping parts molds Learn more: Points to note in the design of continuous stamping dies (2)