Precision Die Stamping Parts Co., Ltd. produces excellent products for customers from source materials

Precision Die Stamping Parts Co., Ltd., every stamping part produced for customers should be beautiful in appearance and accurate in size. Then we need to start from the source, and we must carry out quality control in the selection of raw materials. Xiaoshuo takes you to understand the details of the materials: 1. The thickness is accurate and uniform. The stamping die is precise and has a small gap. If the thickness of the sheet is too large, the deformation force will be increased, and the material will be jammed, and the die will even be swelled. If the sheet is too thin, it will affect the quality of the finished product and even crack during deep drawing. 2. The surface is smooth, no scars, no scratches, no surface cracks, etc. All surface defects will remain on the surface of the finished workpiece, and the crack defects may extend deep and wide in the process of bending, deep drawing, forming, etc., resulting in waste products. 3. Uniform yield strength without obvious directionality. Anisotropy (see plastic deformation in the drawing, flanging, bulging and other stamping processes, due to the occurrence of all-directional yielding, the inconsistent amount of plastic deformation will cause uneven deformation and inaccurate forming. Defective or scrap. Hardware, 15 years of craftsmanship and focus on precision die stamping parts Co., Ltd., 20000+ sets of mold custom processing and production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, and stamping accuracy can reach ±0.01 mm, 16 quality inspection layers are strictly for quality control. It can quickly solve time-critical problems, stamping accuracy problems, and production quality problems for you.