Precision metal mold stamping parts, properly handle problems and provide services to customers as scheduled

Precision metal mold stamping parts sometimes turn over during production, which affects production, quality, and efficiency. The stamping plant should find a solution in time and deal with this situation in a timely manner, in order to better serve the customers. In precision metal mold stamping parts, the shape of the stamping part is formed by punching the remaining material around the stamping part. The main reason for the turning and distortion of the punching parts is the influence of the punching force. When punching, due to the existence of the punching gap, the material is stretched on one side of the die (the material is warped upward) and compressed on the side of the male die. When using the unloading plate, use the unloading plate to compress the material to prevent the material on the die side from warping upwards. At this time, the force of the material changes accordingly. As the discharge plate increases its pressing force, the material on the punch side is stretched (compression force tends to decrease), while the material on the concave die surface is compressed (tension force tends to decrease). The overturning of the stamping part is caused by the stretching of the material on the die surface. Therefore, when punching, pressing and pressing the material is to prevent the punching from turning over and twisting. Hardware, 15 years of craftsmanship focusing on precision metal mold stamping parts, 20,000+ sets of customized mold processing and production, and skilled cooperation experience in more than 20 industries. The daily production capacity is 3 million punching times, the punching accuracy can reach 0.01mm, and the 16 quality inspection layers are strictly for quality control. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve mass production quality problems.