Precision metal stamping parts processing, easy to loosen the stamping die [hardware]

In the processing of precision metal stamping parts, sometimes there will be problems in production, after the mold is closed, the mouth will not be loose. Xiaoshuo shares a few points with you, easy to get the stamping die, easy way to loosen the mouth: 1. Re-sharpening the punch and the lower die. A mold with a sharp edge can produce a beautiful cut surface. If the edge is blunt, additional punching pressure is required. Moreover, the section of the workpiece is rough, which produces a great resistance, causing the punch to be bitten by the material. 2. The gap of the mold. If the gap of the mold is not properly selected relative to the plate thickness, the punch needs a large demolding force when it is separated from the material. If the punch is bitten by the material for this reason, please replace the lower die with a reasonable clearance. 3. The state of the processed material. When the material is dirty or dirty, the dirt adheres to the mold, making the punch bite by the material and unable to be processed. 4. Deformed materials. The warped material will clamp the punch after punching the hole, causing the punch to be bitten. For warped materials, please flatten them before processing. Hardware, 15 years of ingenuity and focus on precision metal stamping parts processing, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, the choice is peace of mind and peace of mind!