Precision metal stamping parts processing plant, the ability to solve problems determines the result

Precision metal stamping parts processing plants will encounter problems in most of their work, and the speed and method of solving the problems will be doomed to the results of the problems. What are the common problems encountered in general stamping? Xiaoshuo's finishing points: 1. Adhesion, scratches: defects on the surface of the part or mold due to the friction between the material and the punch or die; 2. Burrs: mainly occur in the cutting die and blanking die, blade The gap between the openings may be large or small, which will produce burrs; 3. Line offset: When the part is formed, the part that first contacts the mold is squeezed and formed a line; 4. Concave and concave: foreign matter (iron filings) on the uncoiling line , Rubber, dust) mixed to cause bumps; hardware, 15 years of craftsmanship focused on precision metal stamping parts processing plant, 20000+ sets of customized mold processing and production, more than 20 industries with skilled cooperation experience. The daily production capacity is 3 million punching times, the punching accuracy can reach 0.01mm, and the 16 quality inspection layers are strictly for quality control. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve mass production quality problems.