One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.
Precision stamping die upper die seat assembly
In order to shorten the processing cycle of the stamping die, strengthen the accuracy of the die, unify the methods of the operators, reduce the abnormalities that occur during die production, and ensure the production quality and die life, the assembly process of the upper die seat of the stamping die is explained as follows. The upper die seat assembly of the stamping die is completed in the following 10 steps: 1. The splint Φ12.000 positioning hole and the auxiliary guide pin hole are rounded to R1.0 and polished. 2. The frame mouth is removed with a 600# oil stone or diamond knife. . 3. Use 600#~1000# whetstone to flatten both sides of the template to remove the hair. 4. Use kerosene and alcohol to clean the mold surface and inner hole. 5. The assistant guide suits into the same template. 6. Put the punch clamping part into the template frame and check whether the punch is smoothly taken and placed. (Don't put in the punch after closing, so as not to accidentally break the small punch) 7. Fix the punch with the pressure plate. (Note that the pressure plate should not be too close to the punch, so as not to interfere with the punch.) After the punch is fixed, there should be a small space for movement to facilitate the natural correction of the punch. 8. Gently close the stripping plate together with the stripping back plate into the splint, and check whether the pressure plate of the stripping back plate has any interference. When fully closed, there should be no gap between the stripping back plate and the splint. 9. After joining, the blanking punch should exceed the blanking surface by more than 0.8mm (minus the material thickness). 10. Put in the adjusting rod and the upper die adjusting punch, and turn the screw until the adjusting punch is close to the effective height.
Through the above 10 steps, the assembly work of the upper die seat of the stamping die has been completed.
Metal stamping manufacturer is an ODM/OEM professional manufacturer specializing in the design and manufacture of precision stamping dies and precision hardware stamping.