Precision stamping parts processing for shape and size control 'hardware'

In the electronic precision stamping parts factory, the production quality requirements for stamping are very strict. Therefore, we must strictly control the shape and size of precision stamping parts: 1. Requirements for bending precision stamping parts: 1. The shape of the bent parts should be as symmetrical as possible, and the bending radius should not be less than the allowable bending radius of the material. 2. When bending parts with holes, in order to avoid the deformation of the holes 3. The curved side is too short to be easily formed, so the straight part of the curved side should be made H>2δ. If H is required to be very short, you need to leave a proper margin to increase H, and then cut off the added metal after bending. 2. Requirements for drawing precision stamping parts: 1. The shape of drawing parts should be simple and symmetrical, and the depth should not be too large. In order to make the number of drawing less and easy to form. 2. The fillet radius of the deep drawing part does not increase the process procedure. Otherwise, it will inevitably increase the number of deep drawing and shaping work, but also increase the number of molds, and it is easy to produce waste and increase costs. If you want to know more about precision stamping parts, please consult