Precision stamping parts processing requirements 'hardware'

Precision stamping parts processing requirements: 1. Parallelism requirements The so-called parallelism requirements for precision stamping parts processing are the tolerance requirements around the precision stamping parts, for example, rectangular workpieces, and machining requires the thickness of the four corners of the workpiece to reach a certain level. Tolerance range. If the thickness of the four sides measured does not meet the tolerance requirements, the parallelism requirements will not be met. This requires re-adjustment of the workpiece. The problem may occur in the suction cup of the grinder. Due to the excessive use of the suction cup, the computer gong is worn out, resulting in errors in parallelism; it may also be that the grinding wheel is not properly repaired, or the grinding wheel is cracked or chipped. Re-grind the wheel; it may also be that the suction cup is not cleaned, so you must clean the suction cup again and carefully clean it; it may also be that the workpiece has not been trimmed, and burrs have appeared. 2. Verticality requirement The verticality requirement is to require the side and ground of the workpiece to meet the tolerance requirements. What is understood is the legitimate body. From the perspective of the number axis, the machining of mechanical parts is divided into three sides, XYZ, and XZ and YZ are generally required to meet the tolerance requirements. The error appears to be roughly the same as the parallelism requirement. Generally, it can be handled in accordance with the parallelism requirements. 3. Other requirements In addition to the above two aspects, precision stamping parts also have processing requirements such as finish and mirror effect, which often require attention. If you want to know more about precision stamping parts, please consult