Producing precision metal stamping parts, it is more reliable to solve these points

Many quality problems will be encountered in the production of precision metal stamping parts. If these problems are not solved, it will not only affect the production, but also affect the customer's use and assembly. Xiaoshuo sorted out several common phenomena for your reference: 1. Sliding mark: It occurs when the roller stops or accelerates due to the sliding of the roller. 2. The roll material may be shattered or the edges may be wrinkled: the guide roller of the uncoiling line may be wrinkled when the guide roller gap on the mold is small, which is caused by the unbalanced feeding of the coil. 3. Scratches: The main reason for the scratches on the parts is that there are sharp scars on the mold or metal dust falling into the mold. The preventive measures are grinding the scars on the mold and removing the metal dust. Hardware, 15 years of production of precision metal stamping parts, 20,000+ sets of mold customization and production, monthly processing capacity of 100+ sets of stamping dies, daily production capacity of 3 million punching times, 16 quality inspection layers strictly for quality control. It can quickly solve the time-critical problems for you, solve the problems of stamping accuracy, and solve the quality problems of mass production.