Production requirements and working conditions of scaffolding stamping parts

In the production process of scaffold stamping parts, the stamping dies used often need to withstand loads such as impact, vibration, friction, high pressure, tension, and bending. In actual work, plastic molds may even face higher working temperature conditions. Due to the complicated working conditions, they are likely to suffer from wear, fatigue, fracture, and deformation. In order to ensure the production quality of scaffolding stamping parts, when selecting molds, the requirements for its materials are also stricter, at least higher than those of ordinary parts. In addition, due to the different working conditions of different molds, the requirements for mold parts materials are also different. Analyze the production requirements of the scaffolding stamping parts. If you need to use a punching die, you should have high wear resistance and hardness when selecting raw materials. This is because when punching, it is necessary to ensure strong wear resistance and compressive yield point, and at the same time to avoid the problem of mold fracture as much as possible, so it should have high fracture resistance and high resistance at the same time. Bending strength and toughness. In the process of processing scaffolding stampings, if the drawing die needs to be used, the material requirements are good anti-adhesion, high wear resistance and hardness, and at the same time, it must have appropriate toughness and Good cutting performance, and small deformation during heat treatment. Inspection fixture inspection of scaffold stamping parts Put the stamping parts into the inspection fixture, and inspect the stamping parts according to the operating requirements of the inspection tool manual. Production problems Safe production In actual production, process tests similar to the stamping process are commonly used, such as drawing performance tests, bulging performance tests, etc. to check the stamping performance of materials to ensure the quality of the finished product and a high pass rate. The precision and structure of the mold directly affect the forming and precision of the stamping parts. Mold manufacturing cost and life are important factors that affect the cost and quality of stamping parts. Related news: The characteristics of the main materials of stamping parts, the handling of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections