Qingdao Precision Stamping Co., Ltd. solves these 5 major problems and makes customers trust you more

Qingdao Precision Stamping Co., Ltd., in stamping production, it is inevitable that there will be some process problems. For the stamping plant, the ability and speed to solve problems determines the result. Solve the following 5 problems, let your customers recognize you more and trust you: 1. Burr: In the process of punching or trimming edges and corners, there is not completely leftover material, and burrs are generated at the lower part of the cut surface of the steel plate, based on the cut surface. When the burr height is 0.2mm or more, the generated iron powder will damage the mold and produce unevenness. 2. Concave and convex: The surface of the material is abnormally convex or concave, which is caused by foreign matter (iron filings, dust) mixed in the uncoiling line. 3. Roller printing: The cleaning roller or the feeding roller is caused by foreign matter attached to it (occurred at a fixed pitch). Generally, the foreign matter on the roller printing on the sheet can be removed. 4. Sliding mark: It is caused by the sliding of the roller, which occurs when it stops or accelerates suddenly. 5. The roll material may be crushed or the edges may be wrinkled: the guide roller of the uncoiling line may be wrinkled when the guide roller gap on the mold is small, which is caused by the unbalanced feeding of the coil. Hardware, 15 years of ingenuity and focus on Qingdao Precision Stamping Co., Ltd., 20,000+ sets of customized mold processing experience, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, and 16 quality inspection processes are strictly for quality control. It can quickly solve the time emergency for you, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose to rest assured.