Qingxian hardware stamping parts, what are the requirements for selecting stamping materials + 3 million punching next-day production capacity manufacturers

The hardware production technicians of the factory responsible for the production of metal stamping parts in Qingxian County said that the selection of stamping materials should consider the use requirements of the stamping parts, the requirements of the stamping process, and the economy. The following Xiaoshuo will analyze with you based on specific practical experience: 　　 (1) Reasonably select materials according to the use requirements of the stamping parts 　 　 The selected materials should enable the stamping parts to work normally in the machine or parts and have a certain service life. For this reason, the selected material should meet the corresponding strength, stiffness, toughness, corrosion resistance and heat resistance requirements according to the use conditions of the stamping parts. (2) Reasonable selection of materials according to the requirements of the stamping process. For any kind of stamping parts, the selected material should be able to stably form qualified products that will not crack or wrinkle according to the requirements of the stamping process. This is basically and more important. Material selection requirements. For this reason, the following methods can be used to select materials reasonably.　　①Try punching. Based on previous production experience and possible conditions, select several sheets that can basically meet the requirements of stamping parts for trial punching, and choose the one that has no cracks or wrinkles and has a low rejection rate. The result of this method is relatively intuitive, but with greater blindness.　　②Analysis and comparison. On the basis of analyzing the characteristics of stamping deformation, compare the larger deformation degree during stamping forming with the allowable limit deformation degree of sheet metal stamping forming performance, and use this as a basis to select the stamping process requirements suitable for this kind of parts Sheet. Hardware, 15 years of focus on Qingxian metal stamping parts, 20,000+ sets of customized stamping die production experience, monthly processing of 100+ sets of molds, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and silk-like stamping accuracy 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!