Qingxian metal stamping parts, what are the requirements for stamping materials + raw materials adopt national standard original factories

The hardware technicians of the manufacturer responsible for the production of metal stamping parts in Qingxian County said that the nature of the materials used in stamping is very closely related to stamping production, and its nature directly affects the design of the stamping process, the quality of stamping parts and the product life, and also affects the organization of balanced production Production cost of stamping parts.　　 When selecting the material of the stamping parts, not only the use performance should be considered, but also the performance requirements of stamping processing and subsequent process performance should be met. Below, Xiaoshuo will take you to see the basic requirements for stamping materials as follows. 1. It has good stamping and forming performance. For forming processes, such as stretching, bending, segmentation, convex hull, etc., the material should have good stamping and forming performance, that is, it should have good crack resistance, good moldability and Shaping, otherwise the product is prone to deformation, cracking, etc., which will cause difficulties in mold repair. For the separation process, the material is required to have a certain degree of plasticity.　　2, with high surface quality 　　The surface of the material should be smooth and smooth, without defects and damage. The material with good surface quality is not easy to break during molding and not easy to scratch the mold, and the surface quality of the part is also good.　　3. The thickness tolerance of the material should conform to the national standard. 　　Because a certain mold gap is only suitable for materials with a certain thickness range, if the material thickness tolerance is too large, it will not only directly affect the quality of the parts, but may also lead to the appearance of waste products. In the process of correcting bending, shaping, etc., it is possible that the mold or the press may be damaged due to the excessive positive deviation of the thickness. Hardware, 15 years of focus on Qingxian metal stamping parts, 20,000+ sets of customized stamping die production experience, monthly processing of 100+ sets of molds, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and silk-like stamping accuracy 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!