Quality process monitoring and management of stamping parts

When stamping parts are processed by stamping processing plants, quality monitoring and management of the entire processing process is required. Quality supervision is a very important step in the production process of stamping parts. Only by ensuring that there are no quality problems can products satisfy customers. Next, let's take a look at the quality process monitoring and management process of stamping parts. The production line team leader is responsible for the inspection of the quality of the stamping parts. If there is an abnormality, the production will be stopped and the quality inspection staff will be contacted for quality determination. Fill out the 'Mold Repair Form' for the parts that cannot meet the production regulations, and the relevant team shall formulate, rectify or prevent measures. At the end of the batch number, it is necessary to mark the 'last part, inspection time, and inspector's name' on the product. When the quality of the stamping parts and the processing technology are stable, there is no need for full inspection, and it becomes a sampling inspection and line inspection to clarify the quality. For the mass production of automotive hardware stamping parts, the actual sampling frequency should be established in accordance with the GB2828-2003 national standard sampling standard. The quality management of the stamping die production workshop and the inspection of stamping parts are key steps. It is not only a difficult problem to manipulate each point, but also involves several key steps, such as the formulation of standard work, and the basic standard work that inspection staff need to prepare in advance. It is necessary to analyze the reasons of poor quality and formulate preventive measures to control the quality of stamping parts. Only by strictly controlling the quality of stamping parts can it be clear that the quality of stamping parts and the steady increase in production speed can be clarified. However, the purpose of quality management of stamping parts is to manage the process of each element of the stamping die to obtain stamping parts that meet the design plan and product specifications. , Rather than one-sided pursuit of flawless stamping parts. The quality management of the stamping die production workshop needs to strictly control the quality of the process flow, and extensively carry out 'self-process determination': implement the 'double three inspection' system, that is, line inspection, sampling inspection, patrol inspection, distributed database, and final part must be inspected. A part in the whole production process, a part in the whole production process, and a later part are tested in accordance with the 'Sampling Inspection Operation Standards'. During the whole production process, the production line employees conduct visual inspections on the appearance of the stamping parts. If abnormalities occur Stop production and contact the team leader or quality staff to carry out quality determination. [Related recommendation] Learn more: What are the methods for polishing the surface of stainless steel? Learn more: Manufacturing characteristics of automobile stamping parts molds Learn more: Points to note in the design of continuous stamping dies (2)