Refined flat washers with stamping accuracy up to ±0.015mm [hardware]

Refined flat washer, as the name suggests, is a washer with relatively high requirements for material selection, processing, surface and stamping accuracy. And this kind of product requires some manufacturers with technical experience, processing ability, production strength and quality control. Mr. Su from Tianjin, made a special trip here in July last year. He has a gasket that requires very high flatness, with a material thickness of 1.0. After stamping the finished product, the flatness requirement is 0.015mm. Mr. Su found several factories, but he couldn't handle the matter, and the time to deliver to the customer was getting closer and closer. He was very worried and anxious. Director Liang of the Engineering Department, Tan Gong, Li Gong and others immediately held a meeting with Mr. Su on the spot, determined a feasible plan, and began to enter the mold design link. In two days, Director Liang personally completed the design drawings. It took 17 days and the mold was completed three days earlier than the prescribed time. 100 products are fully inspected and all are within the tolerance range. Mr. Su got the model and smiled and gave Director Liang a thumbs up! Hardware, 15 years of craftsmanship focused on refined flat washers, 20000+ sets of mold custom processing and production experience, monthly 100+ sets of mold processing, 3 million punching production capacity per day, stamping accuracy up to 0.01mm, 16 quality inspections strictly for quality . It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!