Ruian hardware stamping parts, what are the requirements for selecting stamping materials + 3 million punching next-day production capacity manufacturers

The hardware production technicians of the manufacturer responsible for the production of Ruian hardware stamping parts said that the selection of stamping materials should consider the use requirements of the stamping parts, the requirements of the stamping process and the economy. The following Xiaoshuo will analyze with you based on specific practical experience: 　　 (1) Reasonable selection of materials according to the use requirements of stamping parts 　 　 The selected materials should enable the stamping parts to work normally in the machine or parts and have a certain service life. For this reason, the selected material should meet the corresponding strength, stiffness, toughness, corrosion resistance and heat resistance requirements according to the use conditions of the stamping parts. (2) Reasonable selection of materials according to the requirements of the stamping process. For any kind of stamping parts, the selected material should be able to stably form qualified products that are not cracked or wrinkled in accordance with the requirements of the stamping process. This is basically and more important. Material selection requirements. For this reason, the following methods can be used to select materials reasonably.　　①Try punching. According to previous production experience and possible conditions, select several sheets that can basically meet the requirements of stamping parts for trial punching, and choose the one that has no cracks or wrinkles and has a low rejection rate. The result of this method is relatively intuitive, but with greater blindness.　　②Analysis and comparison. On the basis of analyzing the characteristics of stamping deformation, compare the larger deformation degree during stamping forming with the allowable limit deformation degree of sheet metal stamping forming performance, and use this as a basis to select the stamping process requirements suitable for this kind of parts Sheet. Hardware, 15 years of focus on Ruian hardware stamping parts, 20,000+ sets of customized stamping die production experience, monthly processing capacity of 100+ sets of molds, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and silk-like stamping accuracy up to 0.01 mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!