Several drawing processing types of metal drawing stamping parts + 15 years of drawing parts processing and production experience

As we all know, metal drawing stamping parts are products with more exquisite workmanship in metal stamping parts, so what are the types of drawing processing? Xiaoshuo has collected several types, and I will share with you below: 1. Cylinder drawing processing: the drawing of cylindrical products with flange (flange). The flange and the bottom are both flat, the side wall of the cylinder is axisymmetric, and the deformation is evenly distributed on the same circumference, and the blank on the flange produces deep drawing deformation. 2. Elliptical drawing processing: the deformation of the blank on the flange is drawing deformation, but the amount of deformation and the deformation ratio change accordingly along the contour shape. The larger the curvature, the greater the plastic deformation of the blank; conversely, the smaller the curvature, the smaller the plastic deformation of the blank. 3. Rectangular drawing processing: a low rectangular piece formed by one-time drawing. When stretching, the tensile resistance at the rounded corners of the flange deformation zone is greater than the tensile resistance at the straight edges, and the degree of deformation at the rounded corners is greater than that at the straight edges. Hardware, 15 years of ingenuity focusing on metal drawing and stamping parts, 20,000+ sets of mold customization production experience, monthly 100+ sets of mold processing, 3 million punching production capacity per day, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!