Several manufacturability of drawing parts in metal stamping parts

Each punching part in metal stamping parts has its processing characteristics and manufacturability, so what are the characteristics and manufacturability of drawing parts in metal stamping parts? Let's briefly talk about it below; 1. The scale ratio of each part of the metal stamping drawing parts should be appropriate. Generally, shallow drawing parts are better to process. If you encounter metal stamping drawing parts with flanges and greater depth, we More stretching times are required, which also increases the production cost. 2. In the stretching of metal stamping parts, the shape should be as simple as possible and symmetrical; mainly because the axis of the stretching part is in the circumferential direction The upper part is uniformly deformed, and simple metal stamping drawing parts are also easy to process; 3. In the drawing metal stamping parts, the fillet radius should also be appropriate, the bottom and the wall, the flange and the wall of the drawing part, etc. Must meet certain requirements, and appropriately increase the fillet radius, which can also be beneficial to forming; 4. Ensure that the thickness of the metal drawing stamping parts is uniform, and the position of the upper hole must be reasonable, etc.; Recommended article: stainless steel stamping parts Common problems in daily processingPrevious: Stamping parts processing plant talk about stamping die gap