Several measures to effectively control the damage rate of stamping parts

I don't know if you know that the meaning of metal stamping dies is actually to produce different metal stamping parts. Therefore, the quality of the stamping die will have a great relationship with the quality of the stamping product. So, in the process of processing, how can we reduce the damage rate? There must be many friends who are more concerned about this issue. Let's look at the specific content below. In fact, we have conducted a statistics on the current processing situation. The statistical results show that in the processing of stamping parts, there are many factors that may affect its production quality. Among them, the problem of unreasonable mold structure and improper selection of materials accounted for about a quarter of the entire problem, while improper heat treatment accounted for about 45%, improper process selection accounted for about one tenth, and improper lubrication accounted for about a quarter. By one-fifth. Therefore, we can see from the above data that if we want to reduce the damage rate as much as possible, then we need to take targeted measures for these reasons. Under normal circumstances, the stamping dies we use are made of metal and other rigid materials, so its basic components include punches, dies and edge-holding devices, which can basically meet the requirements of stamping parts in actual use. Processing requirements. In addition to paying attention to accidents in production, special attention is also required during installation and use. During the installation, ensure that the installation is correct. After the installation is completed, daily protection should be strengthened during use to avoid rust and other undesirable problems. In daily use, you should close and open lightly to prevent hard closing and hard opening, which may cause damage. When using it, care should be taken to select the appropriate model and specifications to ensure that it can meet the requirements of daily use. The above is a few measures that can prevent the stamping parts from being damaged to a certain extent. I hope it can be helpful. Related news: The characteristics of the main materials of stamping parts, the handling of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections